We have been wanting to update the mirror in our son’s bathroom for quite some time but it had to be a very specific size. After months of looking for something in the right scale and finish, we decided to just make what we couldn’t find in stores. The best part is that it turned out to be extremely easy and budget friendly!
I am a huge believer that our kids should be completely involved in the creation of their personal spaces, so every last decision and item are run past them. For this bedroom and bathroom, we have been looking at inspiration photos and colors and finishes together, and I have been interviewing my son to get a continuous understanding of what he likes and what he doesn’t. He loves blues and greens and also seems to gravitate towards darker wood tones. Black metal finishes are his favorite, and he made it very clear that he doesn’t want a drop of gold anywhere. #noted
|image 1 | image 2 | image 3 | sconce | jar | hooks | faucet | planter | mirror | art | shower curtain | art|
We have put together a loose plan to warm up the space and finally make it feel like it belongs to him, above is a general idea of where the room is going. Our goal is to keep the floors, vanity and sink the same and then update the remainder of the items to give the bathroom a less-mom more Parker vibe.
A few of the changes include painting the walls
The mirror was the only thing that we couldn’t source easily. Anything I found online was either too wide, too short or much too expensive. I couldn’t believe some of the prices I was finding for a mirror with a very simple wood frame, which is all we really wanted. Anytime I drove near a HomeGoods I would stop to scope the mirror section, but even they couldn’t save the day this time. I also checked Craigslist and my favorite home consignment stores frequently but nope on those fronts as well. It was finally time to take things into our own hands and just make the mirror ourselves.
- Safety Glasses
- Tape Measure
- Table Saw
- Brad Nailer
- Large Clamp
- Caulk Gun
- Sanding Block
- Wood Glue
- Stain/Foam Brush
The boards were stained in an English Chestnut finish and left outside to dry. I also added a coat of my favorite poly.
Next, we did a dry fit to be sure the mirror would sit flush in the new grooves.
Feeling confident all was going as planned, we assembled the frame of the mirror with wood glue and our brad nailer.
I think the extra-strength adhesive was the literal glue to this entire operation. We ran a thin bead of the adhesive along all of the frame edges.
Popped the mirror in place and then added a second bead of the adhesive to the backside.
I ended up running my finger over the adhesive to smooth it out and then we clamped the entire piece while the glue dried.
The adhesive required 6-7 hours to cure completely, so we let it sit overnight before adding the corner brackets and hanging hardware.
And just like that, we had ourselves a very custom mirror and the start of a bathroom update for our boy!
Because we had just about everything we needed on hand to complete the project, our total cost was about $38 (mirror, trim, adhesive and corner brackets).
The mirror has clean lines, a small amount of depth to the frame and sits flush against the wall. Almost as if someone had planned it that way! #winkwink #smarthubby
I just can’t get over how sturdy it is! I was completely shocked we didn’t need any additional reinforcement, but once that glue dried I felt extremely confident in the construction and durability of the frame.
The only whomp whomp now is how boring the rest of the room is. Parker and I will be heading out to pick up paint samples for the walls this week!
I am looking forward to seeing how just a few small changes will give this small bathroom an entirely new attitude. Stay tuned!
from IHeart Organizing http://www.iheartorganizing.com/2017/06/diy-wood-framed-mirror.html